KNX - IR Converter
Part Number:LT-CON-CON0400-KN-FLH01V1
Category: Converter
- Support 4 IR Channels
- 200 IR codes are supported, 50 IR codes per channel.
- On-board IR Receiver for IR Code learning.
- Scenes for Channel 1 to Channel 3.
- Dedicated Scenes for Channel 4.
- Support 6 Macros for Channel 1 to Channel 3, each Macro can have maximum 10 IR codes with intermediate delay.
- AC Control dependent on external Window Sensor and Presence Detector input object.
📐Technical Specification
+Accesories
📥Document
📹Videos
📚Application Note
| Parameter | Description |
|---|---|
| Number of Channels | 4, Channel 1 to 3 are low power outputs and Channel 4 has both low and high power outputs |
| Supply Voltage | 21- 30 V DC from KNX bus |
| Max Average Operating Current | 9 mA |
| Max Transmitting Distance (LP Channels) | 1 meter |
| Max Transmitting Distance (HP Channel) | 4 meters |
| Frequency Supported for IR Codes | 20 – 60 KHz |
| IR Transmission Wavelength | 940nm/td> |
| IR Transmission angle | 45 degrees |
| IR Emitter Cable Length | 2 meters |
| IR Receiver Cable Length | Normal 2 meters and can be extended to 10 meters |
| Operation Switch | To enable KNX programming |
| Operating Temperature | 0° to 55° C |
IR Receiver/Transmitter
📁 TECHNICAL DOCUMENTS
💿 APPLICATION PROGRAM ETS
- NXIR ETS
- NXIR Configurator
📚 APPLICATION NOTES
Application |
Description |
|---|---|
| Application Note | Description of Application |