Input Module KNX
Part Number: LT-ACT-INP0600-KN-FLH01V1
Category: Input Module
- Input can be configured for any type of Momentary Push Button, any standard Piano Switch and Door Contact, Presence Detector or any of the sensors.
- Action for the Digital Input can be configured as Switching (ON, OFF and Toggle), Value Transmitter 1-byte and Scene.
- Two different control objects for both states of Switch (ON and OFF) and both states of Sensors (NO and NC).
📐Technical Specification
+Accesories
📥Document
📹Videos
📚Application Note
| Parameter | Description |
|---|---|
| Number of Inputs | 6 |
| Inputs per Common | 3 |
| Operation Voltage | 3 |
| Number of Digital Inputs | +3.3 V DC in the common |
| Switching Type | Dry voltage contacts between input and common |
| Connection Method | Screw Connection with tension sleeve |
| Cable Cross-Section | 0.2-1.5mm² /16 AWG/td |
| Maximum Cable Length | 3m |
| Voltage | 30 |
| Maximum Current Consumption | 15mA |
| Connection Type: KNX | Typical TP1 bus connector for 0.80mm Ø rigid cable |
| External Power Supply | Not required |
| Operational Temperature | 0°C .. +55°C |
| Storage Temperature | -20°C .. +55°C |
| Operation Humidity | 5 .. 95% (Non-condensing) |
| Storage Humidity | 5 .. 95% (Non-condensing) |
| Degree of Protection | IP20, clean environment |
| Installation | Flush mount |
| Housing Material | ABS |
| Enclosure dimension (l x w x h) | 44 x 44 x 16 mm |
Input Devices
📁 TECHNICAL DOCUMENTS
🎴 PRODUCT IMAGES
📚 APPLICATION NOTES
Application |
Description |
|---|---|
| Application Note | Description of Application |